Ivory Series Cables

Three Easy Steps to Choosing The Correct Cable For Your HMI:

1. Locate your Controller Manufacturer in the left hand column of the table.
2. Then locate the row with your Controller Model.
3. Follow along that row to the right until you are underneath your particular
    HMI Series or HMI Model.

Important: If it is blank, it means that Maple Systems does not provide a cable or instructions for that particular controller and HMI. The word, “instructions” means that we do not make the cable but the instructions will show you how to do it yourself.

All cables are made to order and are non-refundable so please make sure you have ordered the proper cable for your unit.  If you are unsure, contact Customer Service for assistance.

This information is subject to change without notice.

Communication Cables (by Controller)

Click a “” button below to place an item in your shopping basket.
To continue shopping after that, simply click the “” button on your browser window. 

Note 1:

The SLC 5/01 and SLC 5/02 require the use of an Allen Bradley Communications Interface Module.

Note 2:

The Siemens S7-300 requires the use of an HMI adapter (Maple P/N 7431-0107) to allow communications to a Silver Series OIT.  Please contact Maple Systems for pricing information and lead time.